Holemaker Pilot Pin 4.73 X 102Mm (12-14/ 50Mm Doc) | Accessories Jenny Calipers - Designed for measuring steel

- Designed for measuring steel wire hot & cold rolled steel sheet etc & check sizes from 0 to 36 gauge

Pump is charged by pressing the pump handle down

- Third party tested using a 2:1 safety factor

- 300 Pieces Replacement Packs Available: Part # Size Pack Qty C228-1 6/40 x 1/2 18 C228-2 6/40 x 3/4 18 C228-3 6/40 x 1 24 C228-4 8/36 x 1/2 18 C228-5 8/36 x 3/4 18 C228-6 8/36 x 1 24 C228-7 8/36 x 1-1/4 24 C228-8 10/32 x 1/2 24 C228-9 10/32 x 1 24 C228-10 10/32 x 1-1/4 18 C228-11 10/32 x 1-1/2 18 C228-12 6/40 Nuts 24 C228-13 8/36 Nuts 24 C228-14 10/32 Nuts 24

LORD Fusorå¨ 700 plastic reinforcing mesh can be used for backing patches

Holemaker Pilot Pin 4.73 X 102Mm (12-14/ 50Mm Doc) | Accessories Jenny Calipers - Designed for measuring steelThe pilot pin runs through the centre of an annular cutter and is designed to serve multiple purpose. Actuates the coolant system when pushed against the workpiece. Finds the centre of the hole. Ejects the slug at the end of the cut. SP16002 Pilot Pin 4. 73mm x 102mm