Growlink HvacLINK 2 x 2 Grow Room LED Hydro Flood By integrating a 200-mesh tee

By integrating a 200-mesh tee filter and a dedicated pressure regulator

Specification Value Control Type CO2 set point controller Hysteresis Fixed 20 ppm Outlets 2 Display Large real-time ppm LED Photosensor Yes (night defeat) Elevation Adjustment Yes Power Cord 14 AWG SJTW Power 120 VAC

High Solubility: A clean liquid formula that prevents clogging in drip emitters and complex hydroponic plumbing

since fingerprints and skin oils bake onto the glass and cut UV transmission

LCD Display for Group addressing

Growlink HvacLINK 2 x 2 Grow Room LED Hydro Flood By integrating a 200-mesh teeGrowlink HvacLINK Drops Into Any 24VAC Grow Room Thermostat Wiring The HvacLINK is a smart thermostat for indoor grow rooms. Power lands on the R and C terminals at 24VAC. Six relay outputs handle compressor, fan, and HVAC staging. An RJ 45 port ties the unit back to the Growlink HUB. The thermostat slots in where a standard low voltage thermostat used to sit, so a swap takes minutes rather than a rewire. Day and night temperature setpoints handle the